Plano SEM VER - interior door

£ 275.00

The door is made of a wooden rail and stile set topped with two flush HDF boards covered with LAMISTONE CPL, SILKSTONE or veneered surface. The wood grain is vertical on the rail and stile set and horizontal on panels.


  • Exchangeable: Decormat white tempered glass, Decormat brown, graphite satin (W01-W04 patterns); white matt, brown matt, graphite satin (W05 pattern) tempered glass

  • Single-point mortise lock (rebated system) or magnetic mortise lock (non-rebated system), key-operated, for a cylinder or a bathroom lock

  • Hinges: B type

  • The door closer is not applicable

Standard door leaf size:

618mm x 2077mm
718mm x 2077mm
818mm x 2077mm
918mm x 2077mm

Required Installation hole width:

618mm x 2077mm - 676mm min installation hole width / 786 mm - max installation hole width
718mm x 2077mm - 776mm min installation hole width / 886 mm - max installation hole width
818mm x 2077mm - 876mm min installation hole width / 986 mm - max installation hole width
918mm x 2077mm - 976mm min installation hole width / 1086 mm - max installation hole width

Required Installation hole height:

min installation hole height: 2053 mm
max installation hole height: 2112 mm

Required thickness of your wall

min 75 mm
max 300mm


240 bleached elm V, 241 sandy elm V, 242 gray elm V, 256 bright nougat V, 258 white, 260 white oak, 263 premium walnut, 265 wenge, 276 polish oak, 288 royal maple, 289 grey, 292 royal chestnut, 293 royal anthracite, 294 royal ash tree, 295 royal merbau, 296 polish ash tree, 297 royal nougat, 311 light oak, 312 limba, 323 rustic oak, 334 european oak, 340 ebony, 351 marrone, 370 white-stained oak, 371 truffle oak, 372 coffe oak, 373 white oak, 374 sand oak, 375 gray oak, 376 steel oak, 377 platinum oak, 380 natural ash, 381 moreno ash, 382 rubio ash, 383 negro ash, 405 light walnut, 421 cappucino, 422 mokka, 424 teak, 531 anthracite


Right hand (RH), Left hand (LH),

ADDITIONAL EQUIPMENT (at an extra charge)

  • Size “100”

  • Non-standard door shortening (maximum door shortening available: up to 60 mm, not applicable to W05 version):

  • door shorter by 20 mm (the lower element of the door has a non-standard height)
    door shorter by 30-60 mm (the upper and the lower element of the door has a non-standard height)

  • Door lower by 50 mm

  • Ventilation trim (VENEERED)

  • Ventilation trim (LAMISTONE, SILKSTONE)

  • W05 pattern is available with a non-standard height: 1970 mm, 1985 mm

More on Domadeco

Also Purchased